VicRoads Driving Test Checklist: What to Bring on Test Day

For your VicRoads driving test, you’ll need your learner permit card or digital licence, proof of your 120 hours of supervised driving (via the myLearners app or logbook), and an eligible, roadworthy vehicle. Your car also needs to be clean, currently registered, and meet specific requirements like working seatbelts, mirrors, demisters, and correctly displayed L-plates. Missing even one of these can mean your test is cancelled before you’ve even started the engine.

Nothing feels worse than showing up test-ready, only to be turned away because of a missing document or an overlooked car requirement. It happens more often than you’d think; a decent chunk of test-day disqualifications in Victoria come down to paperwork or vehicle issues, not driving mistakes. Let’s make sure that doesn’t happen to you.

What Documents Do You Need for Your VicRoads Driving Test?

You’ll need your learner permit card or digital driver’s licence, and proof of your 120 hours of supervised driving.

Here’s exactly what to have ready:

1. Your learner permit card or digital licence: If you’ve lost or misplaced it, bring original evidence of identity documents instead
2. Proof of your 120 hours of supervised driving: Shown through your myLearners app, your physical logbook, or both
3. Payment for your test: If it hasn’t already been paid at booking

It’s worth double-checking your myLearners app the night before, just to confirm your hours are all logged and showing correctly. A last-minute syncing issue is an easy thing to avoid with a quick check.

VicRoads Driving Test Car Requirements: What Your Vehicle Needs

Your car must be clean, currently registered, and roadworthy, with working seatbelts, mirrors, demisters, headlights, an accessible handbrake, and correctly displayed L-plates.

This is where a lot of learners unknowingly trip themselves up, not because of their driving, but because of the car itself. Before test day, check that your vehicle has:

• Current registration; an expired rego means an automatic no-go
• A roadworthy condition, no warning lights, no obvious mechanical issues
• Working seatbelts for every occupant, including the tester
• Both side mirrors functioning and properly adjusted
• Operational demisters, even if it’s not cold on the day
• Working headlights, indicators, and horn
• A speedometer visible from the passenger seat; the tester needs to see your speed too
• An accessible handbrake for the tester, in case of an emergency
• Correctly displayed L-plates, front and back

If you’re borrowing a car for your test, a parent’s, a friend’s, or your instructor’s, it’s worth running through this list together beforehand, rather than assuming it’s all fine.

What to Bring to Your Driving Test: The Full Checklist

Beyond documents and your vehicle, bring a comfortable pair of closed shoes, arrive early, and make sure someone can drive the car home if you don’t pass.

Here’s a simple, complete list to run through before you leave home:

• Learner permit card or digital licence.
• Proof of 120 hours of supervised driving (app or logbook).
• An eligible, roadworthy vehicle that meets all car requirements.
• Comfortable, closed-toe shoes (no thongs or heels).
• A support person who can drive if you don’t pass.
• Confirmation of your test booking and appointment time.

Small things like footwear genuinely matter; testers have turned learners away for wearing shoes that make it hard to safely operate the pedals.

When Should You Arrive for Your VicRoads Driving Test?

Plan to arrive at least 15 minutes before your scheduled appointment time.

Arriving late can mean losing your slot entirely and having to rebook, along with paying a new appointment fee. Traffic near VicRoads testing centers can be unpredictable, especially during peak hours, so it’s worth building in extra buffer time, particularly if you’re not familiar with the specific test center location.

Common Reasons Learners Get Turned Away on Test Day

The most common reasons for test-day cancellations are expired registration, missing seatbelts, non-functioning mirrors, and incorrectly displayed L-plates.

It’s a genuinely frustrating way to lose a test slot, especially after weeks of preparation. The good news is that every one of these is entirely avoidable with a five-minute check the night before:

• Registration sticker expired or about to expire
• A cracked windscreen obstructing the driver’s view
• One or more seatbelts not working properly
• L-plates missing, faded, or incorrectly positioned
• Warning lights on the dashboard (engine, brake, or tyre pressure)

If in doubt, it’s far better to catch an issue the day before than to discover it in the test centre car park.

How to Prepare Beyond the Checklist

Getting your paperwork and car sorted is only half the picture; feeling genuinely ready behind the wheel matters just as much. If you haven’t already, it’s worth reading up on the VicRoads hazard perception test, which you’ll need to pass before booking your practical test, and checking out our guide to choosing a test centre in Melbourne’s west if you’re still deciding where to sit your test.

Book a Driving Test Preparation Lesson with Licence Pass

A driving test preparation lesson can help confirm your car meets all requirements and give you a final confidence check before your official test.

If you want an extra layer of reassurance before test day, a lesson with an experienced instructor can help you double-check your vehicle, run through any tricky manoeuvres one more time, and settle any last-minute nerves. Licence Pass offers dedicated driving test preparation across Melbourne’s western suburbs, with a VicRoads-accredited instructor who can talk you through exactly what to expect.

Book your driving lesson with Licence Pass today and head into your test fully prepared.